Living space under the slope.
Enter the area from your floor plan and briefly describe the sloping ceiling. The calculator shows straight away how much of it really counts as living space.
As on the floor plan or in the exposé
This is what your room looks like in section
Your living space
–m²
Optional
Shows what the missing area is worth
A guide value under the Living Space Ordinance (WoFlV) for rooms with a straight sloping ceiling. Stairs, chimneys and niches are not included. It does not replace a measurement on site.
The Living Space Ordinance (WoFlV) is mandatory for subsidised housing and is commonly used elsewhere too, for example in leases, exposés and valuation reports. What matters is how high the room is at each point, measured from the floor to the ceiling.
Rule of thumb (section 4 WoFlV): from 2 m ceiling height the area counts in full, between 1 and 2 m half, below 1 m not at all. Balconies usually count one quarter.
Where the room is at least 2 metres high, the area counts in full.
Where the room is between 1 and 2 metres high, the area counts half. This is typical under sloping ceilings.
Below 1 metre the floor area does not count at all, even if it is used as storage.
Usually one quarter, at most one half, depending on location and quality.
Unheated it counts half. A heated conservatory counts like a normal room.
Stairs with more than three steps, including the landing, do not count. Chimneys and pillars are deducted if they are higher than 1.50 m and have more than 0.1 m² floor area.
Ancillary rooms such as basement, boiler room, unconverted loft and garage are not living space. A storage room inside the flat, however, does count.
Exposés often state the floor area or an area calculated another way. In attic flats the living space is then quickly 10 to 25 percent lower. Calculated with prices per square metre, the difference soon becomes a five-figure sum.
As appraisers in Rostock and throughout Mecklenburg-Western Pomerania, we check the stated areas for plausibility in every market value appraisal and compare them with the building file and the site visit, so that the value is based on the correct area.
Reviewed by Matthias Tasler, Diplom-Sachverständiger (DIA), certified to DIN EN ISO/IEC 17024 (DIAZert). As of November 2026.
Market value appraisal
Wir verwenden Cookies und ähnliche Technologien, um unsere Website zu verbessern. Sie entscheiden, was Sie zulassen – und können Ihre Wahl jederzeit ändern.